Dell 250W Server PSU C627N / V38RM / 6HTWP / N250E-S0 | PowerEdge R210 / R210 II / R220 — Non Hot-Swap Cabled Power Supply
1. Key Features
- Dell 250W non hot-swap server power supply — fixed cabled output, server must be powered down before replacement
- Dell Part Numbers: C627N / 0C627N / V38RM / 0V38RM / 6HTWP / 06HTWP / D221N — same physical unit across all variants
- PSU Models: L250E-S0 / N250E-S0 / NPS-250NB A — interchangeable across compatible PowerEdge platforms
- Cabled output — includes 24-pin ATX, 4-pin 12V ATX, slimline SATA, and 2x SATA power connectors
- Input: 100–240V auto-sensing, 50/60Hz — universal voltage, no manual switching required
- 80 PLUS Silver certified — high efficiency, reduced heat output and power consumption
- Single-fan cooling design optimized for 1U rack server airflow
- Compatible with Dell PowerEdge R210, R210 II, R220, and DL1000 Backup and Recovery Appliance
2. Technical Specifications
| Brand |
Dell |
| Condition |
OEM Compatible — New |
| Dell Part Numbers |
C627N / 0C627N / V38RM / 0V38RM / 6HTWP / 06HTWP / D221N |
| PSU Model Numbers |
L250E-S0 / N250E-S0 / NPS-250NB A |
| Max Output Power |
250W |
| Input Voltage |
100–240V AC, Auto-Sensing |
| Input Frequency |
50 / 60Hz |
| Input Current |
4A |
| Output Rails |
+12V @ 20.8A / +5V @ 10A / +3.3V @ 5.0A / +12VSB @ 1.2A |
| Efficiency |
80 PLUS Silver |
| Hot-Swap |
No — Non Hot-Swap (server must be off for replacement) |
| Output Type |
Cabled (fixed harness) |
| Connectors |
1x 24-Pin ATX / 1x 4-Pin 12V ATX / 1x Slimline SATA / 2x SATA |
| Form Factor |
1U Rack Server PSU |
| Cooling |
Single fan |
3. Compatible Models
- Dell PowerEdge R210
- Dell PowerEdge R210 II
- Dell PowerEdge R220
- Dell DL1000 Backup and Recovery Appliance
Always verify the Dell part number against your existing PSU label before ordering.
4. Package Contents
- 1 x Dell 250W Non Hot-Swap Server PSU (OEM Compatible — New)
5. Warranty
- 90-day replacement warranty
- Covers manufacturing defects; physical damage and improper installation not included
6. Additional Notes
- This is a non hot-swap PSU — the server must be fully powered down before removing or installing this unit. It cannot be replaced while the system is running.
- Cabled output design: power cables are fixed/attached to the PSU (not modular). Ensure existing cable routing inside the chassis is compatible before replacement.
- C627N / V38RM / 6HTWP are Dell part numbers for the same 250W PSU unit — C627N and V38RM are typically associated with R210 / R210 II; 6HTWP is the R220 variant. All share the same form factor and are cross-compatible.
- OEM Compatible — New unit. Not refurbished.