Description
OMRON USB-CIF02 (CQM1-CIF02 USB Version) | USB to 20-Pin PLC Programming Converter Cable — 2.5M
The Omron USB-CIF02 is the USB version of the CQM1-CIF02, a USB-to-RS232 converter programming cable for connecting a PC to Omron CQM1, CPM1, CPM1A, CPM2A, C200HS, C200HX/HG/HE, and SRM1 Series PLCs via their 20-pin peripheral port. No native RS-232 port required — the built-in USB converter creates a virtual COM port.
Key Features
- USB Type-A on PC side — built-in USB-to-RS232 converter; no native serial port required
- 20-Pin (flat, proprietary) connector on PLC side — Omron peripheral programming port
- USB-to-RS232 conversion with LED TX/RX indicator — virtual COM port, USB bus powered
- 2.5-metre cable length
Technical Specifications
| Cable Model | USB-CIF02 (CQM1-CIF02 USB Version) |
| Cable Length | ~2.5 Metres (2.5M) |
| Interface — PC Side | USB Type-A (Male) |
| Interface — PLC Side | 20-Pin Flat (Omron peripheral port) |
| Conversion | USB to RS-232 |
| OS Support | Windows XP / 7 / 8 / 10 / 11 (32 & 64-bit) |
| Software | CX-Programmer V1.0 and above |
| Condition | OEM Compatible — New (no retail box) |
Compatible Models
- Omron CQM1 Series PLCs (with 20-pin peripheral port)
- Omron CPM1, CPM1A, CPM2A, CPM2AH Series PLCs
- Omron C200HS, C200HX, C200HG, C200HE Series PLCs
- Omron SRM1 Series
- Use with CX-Programmer software
!
Disclaimer
Always verify the exact port type and model number on your device before ordering.
If you are unsure which model is suitable, chat with the NJ Bravo team before ordering. We will help you check the part number, connector, and compatibility.
Typical Use Cases
- USB-based programming for Omron CQM1/CPM1A/CPM2A/C200HS from modern PCs
- Program upload/download and online diagnostics via CX-Programmer
Package Contents
- 1× Omron USB-CIF02 USB Programming Cable, USB-A to 20-Pin, 2.5M (OEM Compatible — New)
Warranty
- 90-day replacement warranty
- Covers manufacturing defects; physical damage and improper installation not included
Additional Notes
- OEM compatible — not an Omron-branded unit. Driver installation required — creates a virtual COM port (FT232 chipset).
- This is the USB version of the CQM1-CIF02. For the RS-232 DB9F version (requires native COM port), a separate cable is available.
- Does NOT support C200H Series. Also not compatible with CS/CJ series — for those, use USB-CN226 (CPC-PLC-08).
