Description
Weinview Weintek HMI to Delta DVP PLC Cable TK-DVP (DB9F-MD8) 3M
Key Features
- HMI-to-PLC communication cable linking a Weinview / Weintek HMI to a Delta DVP series PLC
- Reference part number: TK-DVP
- Connectors: DB9 Female (HMI COM port) to MD8 Male 8-pin Mini-DIN (Delta DVP RS-232 port)
- RS-232 serial link — direct connection, no converter or driver required
- Cable length: 3 metres
- Shielded cable with moulded strain-relief ends for industrial cabinet use
Technical Specifications
| Cable Type | HMI-to-PLC Communication Cable (RS-232) |
|---|---|
| Reference Part No. | TK-DVP |
| HMI Connector | DB9 Female (9-pin D-Sub) |
| PLC Connector | MD8 Male (8-pin Mini-DIN) |
| Signal Standard | RS-232 (TXD / RXD / GND) |
| Length | 3 metres |
| Compatible HMI Brand | Weinview / Weintek |
| Compatible PLC Brand | Delta Electronics (DVP Series) |
| Shielding | Shielded, moulded connector ends |
| Condition | New |
Compatible Models
Weinview / Weintek HMI (with DB9 COM port):
- MT6071iP / MT6071iE
- MT8071iP / MT8071iE
- MT8102iP / MT8102iE
- MT8103iE
- TK6070iP / TK6070iQ
- TK8071iP
- MT6103iP
- cMT-X / cMT3072 series (with serial COM port)
Delta PLC (with round MD8 RS-232 port):
- Delta DVP-ES2 / DVP-EX2
- Delta DVP-SS2 / DVP-SA2 / DVP-SX2
- Delta DVP-SV2
- Delta DVP-EH2 / DVP-EH3
- Delta DVP-SE
!
Disclaimer
Verify that your Delta PLC has the round 8-pin Mini-DIN (MD8) RS-232 port and that the HMI COM port is a DB9 male connector before ordering.
If you are unsure which model is suitable, chat with the NJ Bravo team before ordering. We will help you check the part number, connector, and compatibility.
Package Contents
- 1× Weinview / Weintek to Delta DVP HMI communication cable (3M)
Warranty
- 3-month replacement warranty
- Covers manufacturing defects; physical damage and improper installation not included
Additional Notes
- This is a communication (data link) cable between HMI and PLC — it is not a project download cable. EasyBuilder Pro project transfer uses the HMI USB or Ethernet port.
- In EasyBuilder Pro, set the HMI COM port to RS-232 and select the Delta DVP driver.
- Will not work with Delta PLCs that provide only RS-485 terminal blocks, or with Ethernet-only communication setups.
- Other lengths (1M / 5M / 10M) available on request — contact us for a quotation.
