Description
LG / LS USB-LG-XGB | USB to DB9M + Round 6-Pin Dual Connector PLC Programming Cable — 3M
The USB-LG-XGB (dual connector variant) is a USB-to-RS232 converter cable for LG/LS (LSIS) PLCs. This model features two PLC-side connectors — a DB9 Male for XGK-CPU series and a Round 6-Pin for XGB/XBC/XBM series — allowing it to serve a wider range of LG/LS PLC models. Only one connector can be used at a time.
Key Features
- USB Type-A on PC side — built-in USB-to-RS232 converter; no native serial port required
- Dual PLC connectors: DB9 Male (for XGK-CPU series) + Round 6-Pin (for XGB/XBC/XBM series)
- Only one PLC connector may be used at a time
- Supports baud rates 9,600 to 115,200 bps
- LED TX/RX indicator, USB bus powered
- 3-metre cable
Technical Specifications
| Cable Model | USB-LG-XGB (Dual Connector) |
| Cable Length | 3 Metres (3M) |
| Interface — PC Side | USB Type-A (Male) |
| Interface — PLC Side 1 | DB9 Male (9-pin D-Sub) — for XGK-CPU Series |
| Interface — PLC Side 2 | Round 6-Pin (Male) — for XGB / XBC / XBM Series |
| Conversion | USB to RS-232 |
| Baud Rate | 9,600 ~ 115,200 bps |
| Power Supply | USB bus-powered |
| OS Support | Windows XP / 7 / 8 / 10 / 11 (32 & 64-bit) |
| Condition | Amsamotion / OEM Compatible — New (no retail box) |
Compatible Models
- LG/LS XGB Series: XGB-XBCH, XGB-DR/DC variants (Round 6-Pin end)
- LG/LS XBC, XBM Series PLCs (Round 6-Pin end)
- LG/LS XGK-CPU Series: XGK-CPUU, XGK-CPUH, XGK-CPUA (DB9M end)
- LG/LS K7M, K10S, K120S, Master-K Series (DB9M end)
- Software: KGLWIN (Master K) / XG5000 (XGB/XBC/XBM)
!
Disclaimer
Always verify the exact port type and model number on your device before ordering.
If you are unsure which model is suitable, chat with the NJ Bravo team before ordering. We will help you check the part number, connector, and compatibility.
Typical Use Cases
- USB-based programming for LG/LS XGB/XBC/XBM PLCs (Round 6-Pin end) or XGK-CPU PLCs (DB9M end)
- Single cable covers two LG/LS PLC families
Package Contents
- 1× LG/LS USB-LG-XGB Dual Connector Programming Cable, USB-A to DB9M+6-Pin, 3M (OEM Compatible — New)
Warranty
- 90-day replacement warranty
- Covers manufacturing defects; physical damage and improper installation not included
Additional Notes
- OEM compatible — not an LS/LG-branded unit.
- Dual connector — only one PLC-side connector should be connected at any time. Do not connect both simultaneously.
- Driver installation required (CH340 or FT232 chipset depending on variant).
