Description
WEINTEK MT-FX | DB9M to MD8 HMI-to-PLC Communication Cable — 10M
The Weintek MT-FX (10M) is an extended-length RS-485 communication cable for connecting Weintek MT Series HMI Touch Panels to Mitsubishi FX Series PLCs. The 10-metre version is suited for large machine installations or control panels where device separation requires a longer cable run.
Key Features
- DB9 Male (9-pin D-Sub) on HMI side — connects to Weintek MT6000/MT8000 HMI RS-485 COM port
- MD8 / Mini-DIN 8-Pin (Male) on PLC side — Mitsubishi FX Series RS-422/485 port
- 10-metre cable — for large panel or long-distance HMI-to-PLC installations
- RS-485 protocol — standard for Mitsubishi FX HMI communication
Technical Specifications
| Cable Model | MT-FX |
| Cable Length | 10 Metres (10M) |
| Interface — HMI Side | DB9 Male (9-pin D-Sub) |
| Interface — PLC Side | MD8 / Mini-DIN 8-Pin (Male) |
| Protocol | RS-485 |
| Condition | OEM Compatible — New (no retail box) |
Compatible Models
- Weintek MT6000/MT8000 Series HMI: MT6050i, MT6070iH, MT8070iH, MT8102iE and similar
- Mitsubishi FX Series PLCs: FX0S, FX0N, FX1S, FX1N, FX2N, FX3U with MD8 port
!
Disclaimer
Always verify the exact port type and model number on your device before ordering.
If you are unsure which model is suitable, chat with the NJ Bravo team before ordering. We will help you check the part number, connector, and compatibility.
Typical Use Cases
- Long-distance HMI ↔ Mitsubishi FX PLC link for large machines and distributed panels
- EasyBuilder Pro HMI with Mitsubishi FX RS-485 communication driver
Package Contents
- 1× Weintek MT-FX HMI-to-PLC Communication Cable, DB9M to MD8, 10M (OEM Compatible — New)
Warranty
- 90-day replacement warranty
- Covers manufacturing defects; physical damage and improper installation not included
Additional Notes
- OEM compatible — not a Weintek-branded unit.
- Configure EasyBuilder Pro with Mitsubishi FX Series RS-485 driver. Baud rate and parity must match PLC settings.
- Part of the MT-FX length family: 3M (CPC-PLC-1803), 10M (this).
