Description
OMRON USB-XW2Z-200S-CV | USB to DB9M RS-232 PLC Programming Converter Cable — 3M
The Omron USB-XW2Z-200S-CV is a USB-to-RS232 converter programming cable for Omron PLCs. It connects via USB on the PC side and a DB9 Male on the PLC side, compatible with Omron CQM1, C200H, CS, CJ, and CPM2C Series PLCs that have a DB9 RS-232 programming port.
Key Features
- USB Type-A on PC side — built-in USB-to-RS232 converter; no native serial port required
- DB9 Male (9-pin D-Sub) on PLC side — connects to Omron PLC RS-232 programming port
- LED TX/RX activity indicator
- Auto-adaptive baud rate: 300 bps to 1 Mbps
- USB bus powered
- 3-metre cable
Technical Specifications
| Cable Model | USB-XW2Z-200S-CV |
| Cable Length | 3 Metres (3M) |
| Interface — PC Side | USB Type-A (Male) |
| Interface — PLC Side | DB9 Male (9-pin D-Sub) |
| Conversion | USB to RS-232 |
| Baud Rate | 300 bps ~ 1 Mbps (auto-adaptive) |
| Power Supply | USB bus-powered |
| OS Support | Windows XP / 7 / 8 / 10 / 11 (32 & 64-bit) |
| Software | CX-Programmer V1.0 and above |
| Condition | OEM Compatible — New (no retail box) |
Compatible Models
- Omron CQM1, CQM1H Series PLCs
- Omron C200HE, C200HG, C200HX, C200HS Series
- Omron CS Series, CJ Series PLCs (RS-232 port models)
- Omron CPM1, CPM1A, CPM2A, CPM2C Series
- Note: Note: Does NOT support Omron C200H Series (verify with compatibility list)
!
Disclaimer
Always verify the exact port type and model number on your device before ordering.
If you are unsure which model is suitable, chat with the NJ Bravo team before ordering. We will help you check the part number, connector, and compatibility.
Typical Use Cases
- USB-based PLC programming for Omron CS/CJ/CQM1 from modern PCs
- Program upload/download and online monitoring via CX-Programmer
Package Contents
- 1× Omron USB-XW2Z-200S-CV Programming Cable, USB-A to DB9M, 3M (OEM Compatible — New)
Warranty
- 90-day replacement warranty
- Covers manufacturing defects; physical damage and improper installation not included
Additional Notes
- OEM compatible — not an Omron-branded unit.
- Driver installation required — FT232 chipset (FTDI) or CH340 depending on variant.
- Note: Does NOT support Omron C200H Series. Verify your specific PLC model compatibility before ordering.
- For CJ2M Series with square-shaped port, a different cable type is required.
