Description
Weintek TK6070iP / TK6071iP / TK6051iP HMI to Fatek FBS PLC Cable TK-FBS (DB9F-MD4) 3M
Key Features
- New OEM HMI-to-PLC communication cable, Weintek TK series touch monitor to Fatek FBS series PLC
- Reference part number: TK-FBS
- Connectors: DB9 Female (HMI COM port) to MD4 Male 4-pin Mini-DIN (Fatek FBS Port 0)
- RS-232 serial link, direct connection with no converter needed
- Cable length: 3 metres
Technical Specifications
| Cable Type | HMI-to-PLC Communication Cable (RS-232) |
| Reference Part No. | TK-FBS |
| HMI Connector | DB9 Female (9-pin D-Sub) |
| PLC Connector | MD4 Male (4-pin Mini-DIN), Fatek FBS Port 0 |
| Signal Standard | RS-232 (TXD / RXD / GND) |
| Length | 3 metres |
| Compatible HMI Brand | Weintek / Weinview |
| Compatible PLC Brand | Fatek (FBS Series) |
| Brand | OEM |
| Condition | New |
| Warranty | 3 Months |
Compatible Models
- Weintek / Weinview HMI: TK6070iP, TK6071iP, TK6051iP
- Fatek PLC: FBS series main unit, built-in Port 0 (4-pin Mini-DIN RS-232)
- Other Fatek FB / B1 / B1z units with a 4-pin Mini-DIN Port 0: please confirm with us before ordering
!
Disclaimer
- This cable connects to the Fatek FBS 4-pin Mini-DIN Port 0 only. It does not fit the DB9 port of an FBS communication board (e.g. FBs-CB2 / CB22) or RS-485 terminals.
- Pin assignment of the HMI 9-pin COM port differs between Weintek models. Check your HMI model and COM port before ordering.
- This is an HMI-to-PLC data cable, not a PC programming or project download cable.
- Back-order quantities cannot be cancelled after payment.
If you are unsure which model is suitable, chat with the NJ Bravo team before ordering. We will help you check the part number, connector, and compatibility.
Package Contents
- 1× Weintek to Fatek FBS HMI communication cable (3M)
Warranty
- 3 Months
Additional Notes
Product Description
This 3-metre TK-FBS cable links a Weintek TK6070iP, TK6071iP or TK6051iP touch monitor to the built-in RS-232 Port 0 of a Fatek FBS PLC, so the HMI can read and write PLC data directly. In EasyBuilder Pro, set the HMI COM port to RS-232 and select the Fatek FB/FBs driver. Weintek’s connection guide lists 9600 bps, 7 data bits, even parity, 1 stop bit and station 1 as defaults; these must match the PLC port settings. Other lengths are available on request.
Reviews
There are no reviews yet.