Description
WEINTEK MT8106IQ-FBS (MT-FBS / OP320-FBS) | HMI-to-PLC Communication Cable — 2.5M
A dedicated communication cable for connecting Weintek MT Series HMI touch panels (such as the MT8106iQ) or OP320 operator panels to Fatek FBS Series PLCs. Enables real-time HMI control and monitoring of Fatek FBS PLCs.
Key Features
- Connects Weintek MT HMI COM port to Fatek FBS Series PLC RS-232 port
- 2.5-metre cable length — suitable for standard panel installations
- RS-232 serial communication protocol
Technical Specifications
| Cable Model | MT8106IQ-FBS / MT-FBS / OP320-FBS |
| Cable Length | 2.5 Metres (2.5M) |
| Interface — HMI Side | DB9M (COM port) — verify per specific HMI model |
| Interface — PLC Side | MD8 – Fatek FBS RS-232 port connector |
| Protocol | RS-232 Serial |
| Condition | OEM Compatible — New (no retail box) |
Compatible Models
- Weintek MT Series HMI: MT8106iQ and similar MT6000/MT8000 models
- OP320 operator panel (with FBS driver)
- Fatek FBS Series PLCs (Port 0 RS-232)
!
Disclaimer
Always verify the exact port type and model number on your device before ordering.
If you are unsure which model is suitable, chat with the NJ Bravo team before ordering. We will help you check the part number, connector, and compatibility.
Typical Use Cases
- HMI ↔ Fatek FBS PLC real-time communication for process visualization
- EasyBuilder Pro HMI configured with Fatek FBS RS-232 driver
Package Contents
- 1× Weintek MT8106IQ-FBS HMI-to-PLC Communication Cable, 2.5M (OEM Compatible — New)
Warranty
- 90-day replacement warranty
- Covers manufacturing defects; physical damage and improper installation not included
Additional Notes
- OEM compatible.
- Verify exact connector types on both HMI and PLC before ordering, as Weintek MT HMI COM port pinout may vary between models.
- Configure EasyBuilder Pro with Fatek FBS (FATEK communication protocol) driver.
